Top 10 Best Muffler Weld Putty [2022]

Last Update:

You can trust our selection for Muffler Weld Putty Reviews. Because We have worked hard studying and analyzing 61808 reviews for Muffler Weld Putty and rating them. It was a difficult job to list only ten products for Muffler Weld Putty where thousands of them available online. I hope it will help you to take final decision for Best Muffler Weld Putty.

Best Muffler Weld Putty
As an Amazon Associate I earn from qualifying purchases.
NoProductScoreAction
1J-B Weld 8297 HighHeat 500 Degree Epoxy Putty-2 Pack9.8Check Price
2Yale MC16 Muffler Cement 16oz (Pack of 2)9.8Check Price
3J-B Weld 37901 ExtremeHeat High Temperature Resistant Metallic Paste - 3 oz9.6Check Price
4J-B Weld 8297 HighHeat 500 Degree Epoxy Putty Stick - 2 oz9.4Check Price
5Forney Easy Weld 2619.2Check Price
6Dynomax 35958 Hardware Muffler Cement9Check Price
7J-B Weld 8267 SteelStik Steel Reinforced Epoxy Putty Stick - 2 oz9Check Price
8J-B Weld ExhaustWeld 2" x 72" Repair Wrap8.4Check Price
9Blue Magic 18003 High Temperature Metal Repair8.4Check Price
10Permatex 80333 Muffler and Tailpipe Putty8.2Check Price

Our team scanned 61808 reviews before putting any suggestions for the muffler weld putty in this article.

Comparison Chart of Top 10 muffler weld putty

1. J-B Weld 8297 HighHeat 500 Degree Epoxy Putty-2 Pack

2. Yale MC16 Muffler Cement 16oz (Pack of 2)

  • 2 x 16oz Tubes
  • Seals small holes
  • Cures in minutes
  • Highest quality

3. J-B Weld 37901 ExtremeHeat High Temperature Resistant Metallic Paste – 3 oz

  • JB WELD EXTREME HEAT: Is formulated for repairs to iron, steel and metal in high temperature environments 1000°F / 537°C.
  • THE ORIGINAL COLD WELD: JB Weld was developed as an alternative to torch welding.
  • SIMPLE TO USE: When fully cured, this metallic compound can be drilled, machined or sanded.
  • VERSATILE & DEPENDABLE: Ideal for repair work on : exhaust manifolds, pipe connections, mufflers, catalytic converters, outdoor grills, fire boxes, gas and commercial furnaces and water heaters.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B.

4. J-B Weld 8297 HighHeat 500 Degree Epoxy Putty Stick – 2 oz

  • J-B WELD HIGHHEAT: A hand mixable two part epoxy putty stick that is formulated to repair and rebuild materials that will be exposed to high temperatures in automotive and industrial maintenance applications.
  • CURE AND SET TIME: After kneading the two part formula together by hand, HighHeat takes 1 hour to set and cures in 8 hours.
  • PRODUCT FEATURES AND STRENGTH: J-B Weld HighHeat has lap shear strength of 800 PSI at room temperature and 600 PSI at 400oF (204oC) or more.
  • MAJOR USES: Exhaust Manifolds, Tail Pipes, Mufflers, Engine Blocks, Duct Work, Machinery and other high temperature equipment.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld.
  • 3 times stronger at high temperatures
  • Withstands continuous heat up to 450 degrees Fahrenheit, and intermittent heat up to 500 degrees Fahrenheit.
  • Strength of 800 PSI at room temperature and 600 PSI at 400 degrees Fahrenheit
  • Perfect for tail pipes, mufflers, machinery, engine blocks, and exhaust manifolds
  • Special Shipping Information: This item cannot be returned and has additional shipping restrictions

5. Forney Easy Weld 261

  • EASY TO USE-140 FC-I MIG machine uses 0.
  • POWERFUL- Up to 140 Amp output that allows you to weld mild steel up to 1/4 in plate
  • PORTABLE WELDER- Lightweight 19 lbs.
  • RUGGED- All metal case, Built to take the day to day.
  • WELDER INCLUDES- 8′ MIG gun, 8′ ground clamp, Integrated handle with torch wrap and a 20A-15A adapter.
  • PRODUCT SPECIFICATIONS- Dimensions: 16.
  • RECOMMENDED ACCESSORIES- Contact Tips (60170, 60171 and 60172),Welding Nozzles: (85336 and 85337), Diffuser: (85339), Flux Core MIG Wire: (42300 and 42301), Anti-Spatter Spray: (37030), Nozzle Gel: (37031).
  • Click on the (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.

6. Dynomax 35958 Hardware Muffler Cement

  • Effective for sealing exhaust joints subject to elevated temperatures
  • Ideal for “out-of-round” muffler and pipe connections
  • Cures in minutes
  • New Walker accessories help to ensure effective exhaust repairs
  • Walker supplies all of the accessories you need to do the complete exhaust job

7. J-B Weld 8267 SteelStik Steel Reinforced Epoxy Putty Stick – 2 oz

  • J-B WELD STEELSTIK: A hand mixable two part epoxy putty stick that is steel reinforced & non-rusting to quickly repair or rebuild anything made of metal! J-B Weld SteelStik is certified by the NSF and is safe for contact with potable water.
  • CURE AND SET TIME: After kneading the two part formula together by hand, SteelStik takes 5 minutes to set and cures in 1 hour.
  • PRODUCT FEATURES AND STRENGTH: J-B Weld SteelStik has lap shear strength of 900 PSI, can withstand continuous temperatures up to 350F (176C ) and intermittent temperatures of 450F (232C), and is chemical resistant against petroleum, hydraulic fluids and other chemicals when fully cured.
  • SURFACE APPLICATIONS: Iron & Stainless Steel, Copper & Brass, Aluminum & Bronze, Fiberglass and Plastic & PVC.
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld.
  • Fit Type: Universal Fit

8. J-B Weld ExhaustWeld 2″ x 72″ Repair Wrap

  • J-B WELD EXHAUSTWELD: A high strength fiberglass wrap, impregnated with a specially formulated resin for high temperature resistant repairs.
  • CURE AND SET TIME: ExhaustWeld can cure with or without heat! It will cure within 20 minutes if heat is applied to it with either a heat gun or by letting the engine run.
  • HIGH HEAT RESISTANCE: Once fully cured, J-B Weld ExhaustWeld Exhaust System Repair Wrap has a temperature resistance of 1100°F, allowing it to be used on every part of the exhaust system!.
  • APPLICATIONS: Manifolds, Catalytic Converters, Mufflers, Tailpipes and more!
  • EVERYTHING YOU NEED: The kit includes a pair of gloves and a .5″ x 24″ piece of aluminum tape!
  • DO IT YOURSELF: Big or small, you can DIY it with J-B Weld.

9. Blue Magic 18003 High Temperature Metal Repair

  • Welds cracks and holes in iron and steel
  • Withstands temperatures to 2400 degrees Fahrenheit
  • Strength increases with heat
  • Fills cracks, holes and pits
  • Great for boilers, stoves, barbeques, furnaces, heaters

10. Permatex 80333 Muffler and Tailpipe Putty

  • Permanently repairs holes and leaks in exhaust systems
  • Seals out fumes at temperatures up to 2000F
  • Safe for catalytic converters
  • 2 pouch bonus pack
  • Suggested Applications: Mufflers, tailpipes, joints and catalytic converters

Muffler Weld Putty Buying Guide


Does the thought of finding a great Muffler Weld Putty stress you out? Has your mind been juggling between choices when it comes to buying Muffler Weld Putty in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Muffler Weld Putty for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Muffler Weld Putty Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Muffler Weld Putty in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Muffler Weld Putty currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
Top Muffler Weld Putty brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Muffler Weld Putty based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Muffler Weld Putty before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Muffler Weld Putty they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Muffler Weld Putty, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Muffler Weld Putty before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Muffler Weld Putty will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Muffler Weld Putty if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Muffler Weld Putty on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Muffler Weld Putty on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Muffler Weld Putty featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.

Leave a Comment