Top 10 Best Intake Manifold For 351 Cleveland [2022]

Last Update:

You can trust our selection for Intake Manifold For 351 Cleveland Reviews. Because We have worked hard studying and analyzing 41265 reviews for Intake Manifold For 351 Cleveland and rating them. It was a difficult job to list only ten products for Intake Manifold For 351 Cleveland where thousands of them available online. I hope it will help you to take final decision for Best Intake Manifold For 351 Cleveland.

Best Intake Manifold For 351 Cleveland
As an Amazon Associate I earn from qualifying purchases.
NoProductScoreAction
1Edelbrock 2121 Intake Manifold9.8Check Price
22 Barrel Carburetor Carb 2100 Carburetor 2150 Carburetor Compatible with Ford 289 302 351 Cu Jeep Engine F100 F250 F350 with Electric Choke Mounting Gasket - 302 carburetor by BOOTOP9.6Check Price
3JEGS Small Block Chevy 1996-2002 Intake Manifold - For Use With Vortec Cast Iron Cylinder Heads - Non-EGR - Idle - 5500 RPM Power Range - Black Cast Aluminum - Square Bore Mounting Pad9.6Check Price
4Weiand 8023 Stealth Intake Manifold9.4Check Price
5Mr. Gasket 214 Intake Gasket9.2Check Price
6Edelbrock 2181 Performer Intake Manifold9.2Check Price
7Speedmaster PCE349.1013 Fits Ford 302 351C 351M 400 Cleveland 2V & 3V Intake Manifold Gasket Set9Check Price
8Edelbrock 2701 Performer Intake Manifold9Check Price
9MAS Ignition Distributor w/ Cap & Rotor compatible with Ford 351C 351M 400 429 460 HEI 658.8Check Price
10Edelbrock 7561 RPM Air-Gap intake manifold8.4Check Price

We found 41265 reviews when researching. We have considered users feedback on the intake manifold for 351 cleveland and our suggestions includes only the finest of them in this article.

Comparison Chart of Top 10 intake manifold for 351 cleveland

1. Edelbrock 2121 Intake Manifold

  • Rocker arm nut thread size is 7/16-20
  • Made of aluminum with a natural finish
  • Includes intake valves, exhaust valve, valve springs, retainers, locks, guide plate and valve stem seals.
  • Does not include damper spring, rocker arms, nuts and drilled steam holes
  • Guide plate pushrod size is 5/16
  • Fit Type: Vehicle Specific

2. 2 Barrel Carburetor Carb 2100 Carburetor 2150 Carburetor Compatible with Ford 289 302 351 Cu Jeep Engine F100 F250 F350 with Electric Choke Mounting Gasket – 302 carburetor by BOOTOP

  • New Carburetor Two 2 Barrel Carburetor Carb 2100 2150 Compatible with Ford 289 302 351 Cu Jeep Engine with Electric Choke.
  • Works with Ford Mustang Engine 289 cu in (4.
  • Compatible with 1964-1978 Jeep Wagoneer 360 Cu 5.
  • This item is a brand new Carburetor.
  • 2 Barrel Carburetor for Ford F100/F250/F350 with 289 302 may also know as 2-Barrel Carburetor,F250 Carburetor,F350 Carburetor,F100 Carburetor,289 Carburetor,302 Carburetor,351 Carburetor,351 Carburetor 2 barrel,2100 carburetor,2150 carburetor,2100 Carb,2bbl carburetor,302 carb,carburetor 2 barrel f100,2100 A800 carburetor,1969 ford f-100 carburetor,1981 ford f 100 carburetor,A800 carburetor,289 2 barrel carburetor,1978 ford f350 carburetor,Jeep Wagoneer carburetor,Carburetor for 302 Ford.

3. JEGS Small Block Chevy 1996-2002 Intake Manifold - For Use With Vortec Cast Iron Cylinder Heads - Non-EGR - Idle – 5500 RPM Power Range - Black Cast Aluminum - Square Bore Mounting Pad

  • IMPROVE ENGINE PERFORMANCE AND HORSEPOWER with this higher flowing intake manifold compared to a stock cast iron intake.
  • DESIGNED TO FIT WITH POPULAR AFTERMARKET SQUARE BORE 4150 CARBURETORS including Edelbrock, Holley, Quickfuel, Proform, and more.
  • FABRICATED FROM BLACK CAST ALUMINUM for weight savings, great looks, and improved performance
  • FITS GM AND CHEVROLET VORTEC CAST IRON CYLINDER HEADS from 1996 through 2002
  • IDLE TO 5500 RPM POWER BAND for street or mild race applications

4. Weiand 8023 Stealth Intake Manifold

  • Permanent mold casting
  • Includes high rise dual plane design with a square bore carburetor flange
  • Increases drivability
  • Improves horsepower and torque
  • Resists heat, salt and corrosion

5. Mr. Gasket 214 Intake Gasket

  • Forms an airtight leak proof seal
  • Engineered specifically for 351 Cleveland Fords with 2.660 inch by 1.830 inch intake ports
  • 062 inch thick and precision die cut for exact fitment and years of trouble free service
  • Ensures optimum torque retention ideal crush resistance and excellent sheer strength
  • Seals with minimal clamp force yet still releases easily every time

6. Edelbrock 2181 Performer Intake Manifold

  • Delivers improved throttle response over stock intakes and are available in both EGR and non-EGR styles.
  • Compatible with non-EGR styles
  • When using a 12-bolt manifold on 16-bolt heads, 16-bolt intake gasket is used to ensure proper sealing around the water ports on the heads.
  • Factory composition-type embossed gasket also works satisfactorily
  • Boosts torque over a wide RPM range, from idle to 5, 500 RPM

7. Speedmaster PCE349.1013 Fits Ford 302 351C 351M 400 Cleveland 2V & 3V Intake Manifold Gasket Set

  • 349 Intake Manifold Gasket
  • Speedmaster creates unique & distinctive DNA items inspired by the blend of old and new technology.
  • TRACK PROVEN – Surviving the longevity of road, race and recreation is mandatory for all Track Proven products, Bringing you closer to product perfection.

8. Edelbrock 2701 Performer Intake Manifold

  • Made of aluminum with a natural finish
  • Dual plane intake style
  • RPM range is idle to 5, 500 RPM
  • Single carburetor without EGR
  • Use on stock or original equipment standard deck
  • Fit type: Vehicle Specific

9. MAS Ignition Distributor w/ Cap & Rotor compatible with Ford 351C 351M 400 429 460 HEI 65

  • 65,000 volt coil to ensure accurate and reliable timing to 7,500 RPM
  • True spark alignment for instant throttle response
  • Built in high performance ignition module Will interchange with any regular HEI cap
  • One Wire Installation, blue cap or red cap
  • Fully CNC machined and polished housing with adjustable vacuum advance.

10. Edelbrock 7561 RPM Air-Gap intake manifold

  • Patented high-flow runner design
  • Ranges from 1, 500 to 6, 500 RPM
  • Has a natural finish
  • No provision for heated choke or exhaust crossover
  • Will not fit under stock hood of Corvette

Intake Manifold For 351 Cleveland Buying Guide


Does the thought of finding a great Intake Manifold For 351 Cleveland stress you out? Has your mind been juggling between choices when it comes to buying Intake Manifold For 351 Cleveland in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Intake Manifold For 351 Cleveland for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Intake Manifold For 351 Cleveland Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Intake Manifold For 351 Cleveland in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Intake Manifold For 351 Cleveland currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
Top Intake Manifold For 351 Cleveland brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Intake Manifold For 351 Cleveland based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Intake Manifold For 351 Cleveland before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Intake Manifold For 351 Cleveland they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Intake Manifold For 351 Cleveland, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Intake Manifold For 351 Cleveland before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Intake Manifold For 351 Cleveland will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Intake Manifold For 351 Cleveland if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Intake Manifold For 351 Cleveland on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Intake Manifold For 351 Cleveland on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Intake Manifold For 351 Cleveland featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.

Leave a Comment